PRAM

Emerging Memories Today: Process Equipment Requirements

Emerging Memory ParadeSomething that distinguishes the Emerging Memory report that Tom Coughlin and I recently published is the depth in which we cover in the field.  This is not measured in pages, but in the topics that we cover.  For example, this blog post, excerpted from the report, covers the changes in tooling that will be necessary to allow a standard CMOS wafer fabrication plant (a “fab”) to produce an emerging memory technology, and the impact that this is likely to have on the market for semiconductor tools.

All of the emerging memory technologies covered in the Memory Guy’s previous post share certain things in common.  One of them is that they are built between metal layers, rather than in the silicon CMOS substrate itself (with the possible exception of the hafnium oxide FRAM.)

This means that the tooling required for any of these technologies will bear a strong resemblance to that used by any of the others.  For the most part these tools will be used for deposition and etch.  The lithography requirements will be satisfied by the tools used to pattern the metal layers.

The process flow in this figure sheds some light on the steps that Continue reading

Emerging Memories Today: The Technologies: MRAM, ReRAM, PCM/XPoint, FRAM, etc.

Emerging Memory ParadeHere in the US we use an extremely odd expression.  If there are multiple varieties of an item we commonly say: “There are more of them than you can shake a stick at!”  This is a very lengthy way to say: “numerous.”  (I don’t believe that ANYONE understands how that expression became a part of our vernacular!)  Although The Memory Guy isn’t normally seen shaking a stick, I find it an apt way to describe the numerous new memory technologies that are being pioneered today.  There are certainly lots of them!

This post is intended to be very high-level technical description of today’s leading emerging memory technologies.  These are excerpts of the in-depth descriptions that can be found in our recently-released report: Emerging Memories Poised to Explode.

PCM: Also known as PRAM, Phase-Change Memory technology is based upon a material that can be either amorphous or crystalline at normal ambient temperatures.  The crystalline state has a low resistance and the amorphous state has a high resistance.  This is controlled by melting the bit cell by passing a current though it and then allowing it to cool at different rates.

In chemistry and physics, anything with a Continue reading

Accelerating New Memory Materials Research

Intermolecular Characterization ChartWith all the new emerging memories that are being developed there must be quite a number of test runs to study exactly how well these new technologies and materials can perform.  If a batch of 300mm wafers must be used for a single test then the cost multiplies, particularly if no other test can be run on that wafer.

Another great difficulty is that most memory manufacturers run their wafers on very high-efficiency and high-volume wafer fabs.  It is perilous and wasteful to interrupt a production process to inject a batch of test wafers.  Most fab managers would rather have a tooth pulled than to change their flow to accept an experimental lot.

What can be done to improve this situation?

Well the folks at Intermolecular, Inc. (IMI) explained to the Memory Guy that they have a solution: They have built a small fab that allows single wafers to be processed with varying parameters across a single wafer.  In this way one wafer can be used to run 36 or more different experiments all at the same time.  This is clearly more economical than having to run the experiment on 36 wafers or, even worse, 36 batches of wafers!  Intermolecular says that, while production fabs are optimized for manufacturing, their fab is optimized for materials understanding.

The firm calls itself an Continue reading

Emerging Memories Today: Understanding Bit Selectors

Emerging Memory ParadeThe previous post in this series (excerpted from the Objective Analysis and Coughlin Associates Emerging Memory report) explained why emerging memories are necessary.  Oddly enough, this series will explain bit selectors before defining all of the emerging memory technologies themselves.  The reason why is that the bit selector determines how small a bit cell can get, and that is a very significant component of the overall cost of the technology.  Cost, of course, is extraordinarily important because no system designer would use a component that would make a system more expensive than it absolutely needs to be!

A number of the Memory Guy’s readers may never have heard of a selector. I’ll explain it here.  It’s not complicated.

Every bit cell in a memory chip requires a selector.  This device routes the bit cell’s contents onto a bus that eventually makes its way to the chip’s pins, allowing it to be read or written.  The bit cell’s technology determines the type of selector that is appropriate: SRAMs use two transistors, DRAMs use one transistor, and flash memories combine a transistor with the Continue reading

Emerging Memories Today: Why Emerging Memories are Necessary

Emerging Memory ParadeNon-silicon memory technologies have been studied for about as long as have silicon-based technologies, but the silicon technologies have always been preferred.  Why is that, and why should anything change?

This is a question that The Memory Guy is often asked.  The answer is relatively simple.

Silicon memory technologies benefit from the fact that they have always been manufactured on process technologies that are nearly identical to those used to produce CMOS logic, and can therefore take advantage of the advancements that are jointly developed for both memory and logic processes.  In fact, before the middle 1980s, logic and memory processes were identical.  It wasn’t until then that the memory market grew large enough (over $5 billion/year) that it could support any additional process development on its own.

Even so, memory processes and logic processes are more similar than different.  This synergy between memory and logic continues to reduce the process development cost for both memories and logic.

Emerging memories depart from Continue reading

Emerging Memories Today: New Blog Series

Emerging Memory ParadeThere’s never been a more exciting time for emerging memory technologies. New memory types like PCM, MRAM, ReRAM, FRAM, and others have been waiting patiently, sometimes for decades, for an opportunity to make a sizeable markets of their own.  Today it appears that their opportunity is very near.

Some of these memory types are already being manufactured in volume, and the established niches that these chips sell into can provide good revenue.  But the market is poised to experience a very dramatic upturn as advanced logic processing nodes drive sophisticated processors and ASICs to adopt emerging persistent memory technologies.  Meanwhile Intel has started to aggressively promote its new 3D XPoint memory for use as a persistent (nonvolatile) memory layer for advanced computing.  It’s no wonder that SNIA, JEDEC, and other standards bodies, along with the Linux community and major software firms are working hard to implement the necessary standards and ecosystems to support widespread adoption of the persistent nature of these new technologies.

This post introduces a Continue reading

Monatomic PCMs: A New Direction

Ron Neale[The following is a guest post written by Ron Neale.]

Until now designers of PCM devices have tried to make PCM meet their expectations by experimenting with an almost infinite number of possible multi-element glass compositions, in order to tinker with or emphasise a particular composition-related device characteristic. The apparent advantage of this great variety of materials comes with the baggage of reliability and performance-compromising element separation, driven by the forces of electro-migration, electrostatic effects and phase separation.

Is it possible to cast aside the problems of the multi-element PCM compositions and look at the possibility of monatomic PCMs?  For a team at IBM, Zurich and Aachen University the answer is an unequivocal “Yes!” and recently they have published details of the remarkable progress they have made with amorphous antimony (Sb), as an initial candidate element. This research was published in a June 2018 paper in Nature Materials Letters titled: Monatomic phase change memory, by Martin Salinga et al, IBM and Aachen University).

A difficulty faces those venturing in this new direction: While it is possible to bring many elements to the amorphous state, they very quickly crystallize at room temperature and higher.  The IBM researchers used simulations to find that the keys to obtaining a stable amorphous state is to control the quenching rate and the volume of the sample. That part of the antimony research is underpinned by some very impressive simulations that use only about 200 atoms.

Here’s the issue that this approach Continue reading

Extending the Write/Erase Lifetime of Phase Change Memory: Part 3 – Failure Modes for the Threshold Switch

Ron NealeThis is Part 3 of a short Memory Guy series in which contributor Ron Neale continues to explore the possible future impact on PCM memory performance, especially write/erase endurance, building on the results of the IBM/Yale University analysis outlined in Part 1 and Part 2.


Part 3 of this series of articles triggered by the recently published PCM device analysis by a team from IBM/Yale University, moves to a look at its possible implications for the arsenic doped GST threshold switch.  Although the threshold switch was not part of the IBM/Yale work, the implementation of the call for bipolar operation of PCMs means there will be a requirement for a threshold switch whose durability matches that of the memory with which it will be associated in a memory array.

If the study’s finding for PCM can be applied to the arsenic-doped GST threshold switch which is used in today’s commercially-available PCM arrays then the threshold switch might just be the weak link that accounts for the poor endurance of commercial PCM memory arrays.

One little conundrum we must address is: Which Continue reading

Extending the Write/Erase Lifetime of Phase Change Memory: Part 2 – A More Complete View of Element Separation

Ron NealeThis is Part 2 of a short Memory Guy series in which contributor Ron Neale continues to explore the possible future impact on PCM memory performance, especially write/erase endurance, building on the results of the IBM/Yale University analysis outlined in Part 1.


After, in Part 1, summarizing the methodology my next step was to try to bring together in another simple diagram all the detail of the complexity of  the movement of the different elements of the phase change memory material at different locations within the memory cell which the IBM/Yale work has disclosed. Movement which leads to the conclusion that bi-polar operation would be means of extending PCM endurance.

In this post’s first diagram (below) the central region provides illustration of the paper’s unique PCM device structure: A high aspect ratio tapered cell lined with a metal conductor. With the two-state memory switching region located (red coloured) roughly at the centre of the taper.  This means that, Continue reading

Extending the Write/Erase Lifetime of Phase Change Memory: Part 1- PCM Element Separation and Endurance

Ron NealeThis is the first of a new line-up of Memory Guy posts by Ron Neale.   In this 4-part series Ron takes a look at the recently-published analysis by a team from IBM and Yale University (Wiley: Communications of Advanced Materials, Volume 30, Issue 9, March 1, 2018 “Self-Healing of a Confined Phase Change Memory Device with a Metallic Surfactant Layer,” Xie et al) which has cast some new light on the complexity of the movement and element separation in phase change memory (PCM) device structures.


In this series of articles I will briefly review what I think is an important piece of work and its implications for the future of  PCM write/erase (w/e) endurance in commercial PCM memory arrays. Today’s production Phase-Change Memory, the basis of the Intel/Micron 3D XPoint Memory, wears out faster than expected.  This series will investigate some of the potential reasons for this discrepancy.

Back in 2016 a research team led by IBM claimed the world record for PCM w/e endurance of  greater than 2 x 10E12 cycles (ALD-based Confined PCM with a Metallic Liner Toward Unlimited Endurance, Proc IEDM 2016 ). As of today commercially available PCM memory arrays offer w/e endurance of some six orders of magnitude less.  The table below Continue reading